Arrived on time, packaged well enough that Fedex was not able to destroy it in shipping.
Leisure Time Spa 56 Chlorinating Granules specifically formulated for spas and hot tubs, effectively sanitizes and disinfects hot water to keep it clean and clear.
- Maintains clean, clear, sanitized water
- EPA approved
Add 1/2 oz. of this product per 500 gallons of water prior to entering spa. Wait 5 minutes then check chlorine residual. Residual chlorine must read between 2 and 3 ppm. If it does not, additional dosages of material should be added until it does. Once the chlorine residual is established in the 2 to 3 ppm range, the spa or hot tub may be entered.
This product should be added daily or as necessary to maintain 2 to 3 ppm residual chlorine. Frequent checks should be made of residual chlorine using a reliable test kit. This product should be broadcast over the surface of the water and allowed at least 5 minutes mix time before testing. Note: Heavy bather usage or the use of oils or lotions may increase the chlorine demand resulting in the need for more frequent checks of chlorine residual. pH should be monitored with a reliable test kit and maintained at 7.2 to 7.8 for clean water. pH can be decreased by adding a suitable agent such as sodium bisulfate or increased by adding Alkalinity Up.
It is good practice to superchlorinate every 2 to 4 weeks. To superchlorinate, add 1 oz. of this product for each 500 gallons of water. Thoroughly clean spa, vacuum and cycle through filter. Resume program when chlorine residual reads 2 to 3 ppm.
Free Shipping on All Orders of $50.00 or more
I use this to keep my spa water clean. it wont take much product each time. very easy to use. we add it after we soak and let the jets run a cycle.